Connected by TCP review: Smart lighting 101

tcp bulbsremote 2
At a Glance
  • TCP Connected by TCP Home Smart Lighting Kit

    TechHive Rating

    While they might seem like might expensive light bulbs, TCP's Connected lighting system is actually a great way to dip into home automation: Easy to set up, easy enough to use, and plenty of included...

The easiest way to dive into home automation is with lighting: It’s generally cheaper, straightforward to install, and easy to remove or move around. Even better, smart lighting systems often provide significant energy savings, which is a nice cherry on top. Also, I am lazy and love being able to turn off the lights without getting out of bed.

It didn’t take long for me to make friends with the Connected by TCP 3-Pack System—it was almost effortless to set up the hardware and the app is organized in a straightforward manner. Available as a whole set for $143 or à la carte, the Connected 3-Pack includes three 11-watt LED bulbs, the gateway needed to control them, and a remote control (and also comes in a CFL 4-Pack).

3 lamp remote kit lrg

The Home Starter Kit

Each bulb is equivalent to 60 watts and provides 800 lumens of brightness, and because the bulbs have an estimated 23 years of life and an estimated energy cost of $1.32 per year, TCP estimates you can save up to 80 percent on your energy costs compared to incandescent bulbs.

Aside from the energy savings, having a smart lighting system allows you to set scenes so that your lights are only on exactly when and how you like. For example, you can set up the Connected system so that your lights come on a half an hour before you get home, or to dim around the time you like to go to bed, or to turn on when your alarm goes off in the morning.

The hardware

dimmable bulbs

Each bulb is dimmable

Instructions for settings up the Connected system are printed right on the inside of the box (and also available on the TCP Support site)—turn off lights at the wall, screw LED bulbs into sockets, turn lights back on at wall switch, plug Gateway into power and Ethernet, download the app for iOS or Android, and go to town.

If you follow these steps exactly, you will have exactly zero problems setting up the system. However, because the lights must remain on at the wall switch, the bulbs work better some places than others. For example, I loved having a bulb in the living room and on my nightstand because they could be dimmed and adjusted—but having a bulb in the bathroom, where the instinct is always going to be to flick the switch at the wall—was not a good match. Turning any of the lights off at the wall switch effectively knocks it offline and grays it out within the app.

That being said, installing and moving the bulbs around was painless. Up to 250 bulbs can be added to the system, and the remote included in the system is easy to assign and operate (and easy to lose track of).

The remote has a power switch, a dimmer switch, and four buttons to correspond with the number you assign to each light while setting up the system with the app. It takes a little fiddling to get the controls down, and I have no idea how you’d work with 250 bulbs, but it didn’t take long before I could use the remote to dim each light or turn it on and off.

The software

tcp app bulbs detected

The app will automatically detect the bulbs.

The other way to control the LED bulbs is the app for Android and iOS. As soon as you open it, it recognizes the gateway on your network (your phone will need to be on your Wi-Fi network as well), then asks for your location and finds the LED bulbs that are active or on.

When you select to configure your lights in the app, it will then tell you it’s found a new light—you will be able to tell which light the app has found because it should be dimming up and down. I had no idea if I was guessing correctly while setting up the lights because the dimming seemed very subtle, but after I finished configuring them everything was set up correctly.

tcp app configure light bulb

Configuring a new bulb.

Next, I set up each light with a name, location, color theme, number on the remote, and icon. From there, I poked around until I got a bit lost, but still wound up managing to create a room for each light (bathroom, hall closet, bedroom nightstand). With one light per room, the rooms seemed pretty empty but after I relocated a second light to the bedroom and was able to create scenes for that room, that feature was a lot more entertaining to use.

In order to control the lights using your smartphone, you need to register your Remote Account, which is just email, name, and password. Once your Remote Account is registered and connected with your network, you’ll never need to log in again—the app recognizes your Wi-Fi network and will automatically log you in when you open the app.

The app has three tabs: My Lights, Smart Control, and Configure. My Lights lists all your bulbs, organized by room. You can tap on commands to turn the bulb on or off, or dim the bulb—the Dim button provides a pop-up slider, or you can slide the controls alongside each bulb's icon.

tcp app smart control multiple list

Custom scenes are saved to, and can be accessed from, the Smart Control tab.

You can adjust multiple bulbs in a room, then tap Save Scene to quickly save the adjustments and settings. The unnecessarily tiny Next Room button navigates you from room to room.

Saved scenes and examples of scenes appear in the Smart Control view—tapping the name of the scene (or Smart Control) will “run” that scene, and here’s where I ran into my main snags. Like the Next Room button, the blue arrow buttons used to configure each scene are very small.

I accidentally ran several scenes when all I wanted to do was schedule times for them. Because there was no way to cancel the command, the app gave me several error readings. Note to TCP: Please make these buttons bigger. Also, a way to cancel scenes would be great.

If you can accurately tap the arrow, you’re able to adjust the name and icon for the scene as well as change up what devices are associated with it and set a schedule, including days of the week, and stop/start times—even a sunrise/sunset option.

Bottom line

bulb inside up

Let there be light!

All the settings settings are really intuitive—after repositioning the bulbs to my bedroom, and reconnecting the whole system, the app commands felt fluid and straightforward. It helped that I had already acquainted myself with the setup, but the second time around I really enjoyed playing with the system: Setting up various scenes between the hallway and bedroom lights for reading at night or waking up in the morning was really neat.

There are so many ways to automate a home, but this Connected system is good for a variety of users. Beginners can dip their toes in with a kit, and later on add a la carte bulbs and create more custom scenes. Honestly, I’d love to add more bulbs to the Connected system I’ve been testing at home—just never again in the bathroom.

To comment on this article and other TechHive content, visit our Facebook page or our Twitter feed.
At a Glance
  • TechHive Rating

    While they might seem like might expensive light bulbs, TCP's Connected lighting system is actually a great way to dip into home automation: Easy to set up, easy enough to use, and plenty of included energy savings.

    Pros

    • Super simple to set up
    • Kit includes a remote for the lights

    Cons

    • Buttons in the app are mercilessly small
    • No way to cancel running a scene once you've tapped on it.
Notice to our Readers
We're now using social media to take your comments and feedback. Learn more about this here.