Eye-Fi Wireless Card for Digicams
At a Glance
Eye-Fi Wireless Card for Digicams
Easy to set up and use, but range is short and transfers slow.
Wireless uploading is a
The $100 Eye-Fi Card has 2GB of capacity and comes with a small USB memory card reader. To set up a wireless connection, you insert the card in the reader, wait for it to be recognized by your PC, and, in the auto-play dialog that pops up, click an option to install the software. You then use a Web interface to set up a wireless connection, choose a location on your PC to upload photos to, and select from a list of 17 online photo-sharing or photo-blogging sites to use. (You can have the card upload to your PC, a sharing site, or both.) Those sites include most of the big-name ones--Shutterfly, Facebook, Flickr, and TypePad, among others.
Eye-Fi says that, if the PC you're using already has a wireless connection set up, its software can find your encryption key and enter it automatically, but that didn't happen on my system. I entered it manually, which wasn't that much harder. You can use the card with any wireless connection that does not require a splash screen (that means you can't use it at a T-Mobile HotSpot, for example).
One great thing about the Eye-Fi is that you can upload any size and resolution of image that you want to these services--unlike Kodak's EasyShare One camera, which locked you into uploading solely to its own photo-sharing service, where you could view only low-resolution versions.
The downside to being able to transfer big files is that they take a while to upload. I tried the card with a Canon Powershot G9, a 12-megapixel camera. Each 6MB file that the camera produced took about a minute to upload when I had placed the camera three feet from my Linksys router, which is connected to a standard cable-Internet service with a puny 384KB upload speed.
In this case, the broadband connection was probably most responsible for the slow uploads; but with the Eye-Fi Card, you're always at the mercy of your Internet connection, not your LAN speed, because the card uploads your photos to your selected Web-sharing site before it copies them to your PC's hard drive. If it were the other way around, you could review the images more quickly. You can, however, continue shooting while the card is uploading, and of course, the wait seemed much more tolerable when I shot at a lower resolution.
I found that the card's range is pretty limited, too (not surprising, given that its antenna has to fit inside the card). With the Powershot G9 and a Casio Exilim EX-S880, uploads would frequently be interrupted at distances of about 20 feet, and the card didn't connect at all at distances beyond that--distances that posed no problem for my IBM Thinkpad X40 notebook and the wireless adapter attached to my TiVo. I
Whenever you take a shot, the card is supposed to start uploading it automatically. Most of the time, that was the case, but on occasion, a few minutes passed before they began. You cannot jump-start the process, other than by making sure your camera doesn't turn off--it must be on to provide power to the card. Eye-Fi says the card requires only 5 percent more power than a typical non-wireless SD Card, and the code inside the card that controls the wireless components takes up only 14KB of space, so the card still has plenty of capacity for photos.
That you must place your camera and the card close to your router,